I have created this project template to make it easier to program EZ Drummer in FL Studio EZDrummer when using the Drumkit from Hell kit. The sequencer has channels for each unique hit, and the hits are divided into groups to prevent screen clutter (see the attached screenshot). In addition, the mixer is set up to have separate channels for each output, though the toms are grouped on the same channel since there are only 8 outputs. (NOTE: In order for the outputs to go to their own channels in the mixer, you will have to enable multiple outputs for EZDrummer. To do this, open the EZDrummer VST interface, click the arrow in the top left corner, and select "Enable multiple outputs".) This has only been tested in FL Studio 7, so let me know if it works in other versions. I did this all manually, so even though I did put it through quite a bit of testing, there might be a mistake or two left. Let me know if you encounter any issues. INSTRUCTIONS Extract the ZIP, and copy the entire folder to the Data\Projects\Templates\Minimal directory in your FL Studio folder. For example: C:\Program Files\Image-Line\FL Studio 7\Data\Projects\Templates\Minimal\ The path to the project file in this case should be: C:\Program Files\Image-Line\FL Studio 7\Data\Projects\Templates\Minimal\EZDrummer DfH\EZDrummer DfH.flp To create a project with this preset, open FL Studio. Click "File" -> "New from template" -> "Minimal" -> "EZDrummer DfH".